Your router is part of the computer network that connects to the World Wide Web, either by having a static IP address, like 192.168.1.1, or by having a dynamic IP address. The first type of router you will encounter is the standard type of router. This router can be used to connect to your WAN router or to your LAN. The second type of router is the ethernet card or the wireless adapter. You connect this router with an Ethernet cable to connect it to your modem or to your LAN.
The next type of router is the wireless interface or the wireless AP. In most cases this type of router is used for wireless networks such as for a small network in the office or for a home internet access. The wireless interface router can be configured through the web browser. This router type of configuration has a wired Ethernet port for connection to the modem or the LAN. It does not support WEP.
Another type of router is the static wireless LAN or the default gateway address. It is a device built for static internet connections. In most cases, this router is connected to a computer via a WAN connection. When you are setting up this type of router, you need to set up the connection to its internet default gateway address.
Router IP 192.168.1.1
The third type of router is the wireless router ip address. In this case, you will need to connect your wireless router to your modem or the LAN. You need to configure the gateway through the wireless network connection. The default gateway of the internet protocol address is always listed as the same as the physical IP address of the computer. As long as there is no conflict between the internet protocol address and the physical IP address, like 192.168.1.1, this type of router can be an alternative to the traditional ones.
If you use a PC that does not have Wi-Fi capability, you can still configure your router to connect to the internet. First, you should turn off the Wi-Fi on your computer. Then connect your laptop or mobile phone to your router. On the Setup tab, select Wireless router Setup. Then follow the prompts.
After you have finished configuring your router, you may change the default gateway to the IP address of your choice. You can do this by selecting the Wireless router setup and going to the tab marked Default gateway. You will see a screen with your current IP address. Click the Properties button. On the General tab, choose Change.
Then, click the Change IP and enter the IP address you want to set as your default gateway. After you have completed this step, you should reboot your computer to complete the changes. Now, if your computer is not able to connect to the internet, try resetting the router. To do this, on the console (usually control panel), click on the Device Manager option. Look for your modem in the list of devices and then click on Properties.
Last, you can try the wireless router’s password protection feature. If you are not familiar with how to do this, you may seek assistance from your internet service provider. This feature secures your router so you are unable to access it online unless you know its password. Otherwise, you can choose another wireless router that does not require password logging. You may also change your default gateway to something else like it, cid, ssi or any other numerical value you prefer. Changing your router’s settings will help make your wireless router truly yours.
Last but not least, there is the software you can download from various websites that allow you to use a virtual private network for internet access. With this software, you can configure your router for a secure and anonymous internet access. In short, the software will mask your real internet IP address to anyone who may wish to access your internet. To enable this software, you should first download it from its website.
The software’s interface will look like any other typical configuration utility interface. But after you have downloaded and installed the software, you need to run a scan to identify any viruses or spyware that might infect your system. This software has a built-in virus scanner. Once you have successfully detected any threats to your router, then you can run a system update, install the software, and then reboot your machine to complete the process.
All in all, it is easy to keep an eye on your wireless router and know that no one else is snooping around on your internet connection. You do not need to hide your wireless router address because it is readily available to everyone. You just need to take precautionary measures such as running a quick scan every time you turn on the router, before you make changes to your router or when the router is set to automatically detect and associate with a network. And of course, do not forget to run a full security scan once a year, especially if you use a router for online gaming or for sharing files with your friends over the internet.