Tips on How to set up Wireless Broadband on YourFiOS Static IP Address

If you want to know how to get the Verizon FiOS service setup without wasting your time and money, then read this. You need to know how to make a Verizon FiOS Static IP Address for a faster internet connection. This type of address will be needed for high-speed internet service. You need to change this setting because you are getting an unreliable connection. For better results, use the instructions in this article.

The first step is to access the Verizon FiOS website. There, you will find different ways to get your service started. You can choose to either choose an internet package or a plan that is right for you. You can even pay by the month to have a FiOS connection.

Now, you need to enter the IP address of the area network. Click on the radio button of the area code you want to enter. On the following page, you will see an option to static or dynamic. Go for the static one, if you are aiming for a faster internet connection.

After entering the IP, enter the subnet mask. Enter the IP and the destination IP. If you already have an IP, just enter the one you are connecting to the internet with. If you don’t, then go ahead and set one now.

Next step is to set the port forwarding rules. You need to uncomment the port forwarding option so that it is enabled. Now, you need to go ahead and click on the Save tab. This will save the settings and you can continue with the next step.

Finally, you need to enter the static IP address. Enter the address where you want your internet protocol to be forwarded. Make sure you have the right IP. If you have an existing network, just uncomment the setting and add the new static IP. If not, you have to enter the IP of the router you are using to connect to the internet.

Now, you have to check the remaining settings. You need to enter the DNS server. The DNS server is optional. It is not mandatory. But it gives better latency when you type in the web address.

Finally, you have to click on the Save tab again. This will save your changes and you can move on with your Verizon Fios setup. Your internet protocol will now be running through the same IP address that you used in the primary network. And that is how to set up a static IP address with Verizon FiOS. You don’t have to worry about latency this time.

But there is one more thing that you need to do. Go back to the Verizon FiOS main menu and go to router. Here, you will see two options for your setup. Go for the default and just click on it. Then, you will be prompted with a message about security.

You need to enter the security number. Enter the number that is provided on the router box. You need to remember this number. Then, you can continue with your Verizon FiOS setup. Make sure you follow the prompts properly. Click Continue at the end to complete the installation.

Once you have successfully connected the Verizon FiOS router to the internet, you need to set up the wireless adapter. Again, you have to enter the IP address of your computer. It should be as stated earlier that this address should be static. So, just type it and proceed to the next step.

Set the wireless router. Choose the SSID that is of great importance. This is important because it serves as your unique link to the internet.

Now, you are done with your Verizon FiOS static IP address. The next thing that you need to do is set up the wireless network. Again, you can follow the prompts exactly. Set up the security groups if it is required. And then, you can connect the two.