The Frontier Router IP Address is a fully-functional wireless firewall for the Internet that allows users to access any device they desire, but not everyone knows how. That’s because when it was designed, the router didn’t anticipate that people would connect wirelessly to the Internet using more than one device. They thought of the router as simply a gateway between various computer networks, but anyone who connects to the Internet through multiple devices is now considered to be in the “riad” of network users. As a result, any software or setting on the computer has to take this into account and configure security accordingly.
There are three areas of security, you should check when you set up your router to protect your internet connection from unwanted guests. These are the three Frontier Router IP Address settings: All, Guests and Wireless. When you enable the wireless option, you’re allowing all wireless computers on your network (including those that are not on your wireless LAN) to connect to your router. You should only allow those on your network to access the Internet if they also have a password set or web access enabled.
The second entry in the admin panel (router IP address) will tell you which internet protocol version you’re using to connect to your network (version 5 or higher). You’ll probably just want to change the connection type to either IPsec or L2TP, depending on whether you’re using a private or public network. Remember to change this back in the admin panel if you switch to a different protocol.
Next, we have to look at the Frontier router setup. The first thing you’ll see is the IP logon interface. This is the primary connection between your computer and the router. On the left side there’s a display of numbers that represents your network’s subnet. Your primary IP address is shown here, as well as the names of the network’s subnets.
The next section will show you a quick overview of the firewall rules defined for this system. The frontier router IP address that you typed in when you clicked the install or update button is what you’ll use here. You have one packet of data you can send and one you receive. This packet’s destination is the IP address of your modem. The second packet is going to be sent from your router to the other computer, this is the return path for your packet.
The final entry in the Frontier router login list shows the settings for the passwords for the various user groups you created when you created the software. You can change these by clicking on the appropriate password. Again, you should change it back in the admin panel after you finished configuring the software. Changing these passwords is part of the normal installation process, but if you’ve done something wrong (you entered the wrong password) it’s possible for a reset to be necessary.
You may find that you need to create a unique router configuration if you’re going to use more than one IP address with your computer. In order to do this you should use the “netgear-fios-link” tool which is included with some of the most popular web hosting companies. With this tool you can set up several different user groups and assign them different IP addresses which allows them all to connect to their own bandwidth.
Keep in mind that changing the password on your frontier router setup isn’t permanent. It only stays as long as your router’s memory. When the router reboots, the password will be reset. However, you can enable it again and change the password any time before it restarts. If you use the default username and password on your modem, you won’t be able to change them if you have troubleshooting problems later on.